QUICK ENQUIRY

Integrated Services and Consultancy

(An ESA Group Associate)
#37, Second Floor, “Embedded Home”,
36th Cross, II Block, Rajajinagar
Bengaluru-560010,
Karnataka,India

Pratibha Gopalam
Executive Director
98454 03264

BANGALORE
Santanu Chatterjee, DGM-Sales
97313 78934

HYDERABAD
A V Gopalakrishna, Sr Engineer Sales-TMI
90082 96566

CHENNAI
Senthil Kumar, Manager-Sales
75500 76300

PUNE
Amol Kadu, Sales Manager-TMI
98450 44338

KOLKATA
Arun Roy, Manager-Sales
98305 78843

DELHI
Gaurav Rohilla, Sales Executive
72040 74949

VADODARA
Jaimin Shah, Application Engineer
73488 51143

Phone No.
080-67648888, 080-67648836

Sales

Email: sales@isc4esaindia.com


Support

Email: support@isc4esaindia.com

Email: service@isc4esaindia.com

JBC
RMSD System Rework with DT530
Description

RMSD is not only the fastest but also the safest option for soldering and rework, including the use of hot air.

Achieve high-quality soldering with JBC Most Efficient Soldering System, while Intelligent Heat Management helps extend tip life and reduce energy consumption.

Description

RMSD is not only the fastest but also the safest option for soldering and rework, including the use of hot air.

Achieve high-quality soldering with JBC Most Efficient Soldering System, while Intelligent Heat Management helps extend tip life and reduce energy consumption.

Specifications
JTSE Control Unit
Nominal power 700 W
Selectable temperature 150 to 450 °C / 300 to 840 °F
Air flow regulation 5 to 50 SLPM
Vacuum 30% / 228 mmHg / 9 inHg
Profiles 25 (up to 10 steps for each), 1 preset profile
Type K TC connector 1 for Control & Protection
ESD safe Meet ANSI / ESD S20.20-2021
Equipotential bonding Connection to EPA
USB-A Firmware update
Graphics and profiles
USB-B PC communications
RJ12 Connector Remote control or FAE Fume Extractor connection
Pedal connector Tool control
DDE Control Unit
Peak power 150 W per tool
Selectable temperature 90 to 450 ºC / 190 to 840 ºF
Temperature accuracy ±3%
ESD safe Meet ANSI/ESD S20.20-2021
Equipotential bonding Optional connection to EPA
Tip-to-ground resistance <2 ohms
Tip-to-ground voltage <2 mV RMS
USB-A Firmware update
Graphics and profiles
USB-B PC communications
FAE / Robot connector Remote control or FAE Fume Extractor connection
MSE Module
Vacuum 85 % / 640 mmHg / 25.4 inHg
Flow rate 35 SLPM
ESD safe Meet ANSI/ESD S20.20-2021
Weight and Dimensions
Control Unit 232 x 148 x 295 mm / 13.85 kg.
9.13 x 5.83 x 11.61 in / 30.53 lb.
Package 615 x 368 x 637 mm / 19.83 kg.
24.21 x 14.49 x 25.08 in / 43.71 lb.



Specifications
JTSE Control Unit
Nominal power 700 W
Selectable temperature 150 to 450 °C / 300 to 840 °F
Air flow regulation 5 to 50 SLPM
Vacuum 30% / 228 mmHg / 9 inHg
Profiles 25 (up to 10 steps for each), 1 preset profile
Type K TC connector 1 for Control & Protection
ESD safe Meet ANSI / ESD S20.20-2021
Equipotential bonding Connection to EPA
USB-A Firmware update
Graphics and profiles
USB-B PC communications
RJ12 Connector Remote control or FAE Fume Extractor connection
Pedal connector Tool control
DDE Control Unit
Peak power 150 W per tool
Selectable temperature 90 to 450 ºC / 190 to 840 ºF
Temperature accuracy ±3%
ESD safe Meet ANSI/ESD S20.20-2021
Equipotential bonding Optional connection to EPA
Tip-to-ground resistance <2 ohms
Tip-to-ground voltage <2 mV RMS
USB-A Firmware update
Graphics and profiles
USB-B PC communications
FAE / Robot connector Remote control or FAE Fume Extractor connection
MSE Module
Vacuum 85 % / 640 mmHg / 25.4 inHg
Flow rate 35 SLPM
ESD safe Meet ANSI/ESD S20.20-2021
Weight and Dimensions
Control Unit 232 x 148 x 295 mm / 13.85 kg.
9.13 x 5.83 x 11.61 in / 30.53 lb.
Package 615 x 368 x 637 mm / 19.83 kg.
24.21 x 14.49 x 25.08 in / 43.71 lb.
Read More Sales Enquiry