QUICK ENQUIRY

Integrated Services and Consultancy

(An ESA Group Associate)
#37, Second Floor, “Embedded Home”,
36th Cross, II Block, Rajajinagar
Bengaluru-560010,
Karnataka,India

Pratibha Gopalam
Executive Director
98454 03264

BANGALORE
Santanu Chatterjee, DGM-Sales
97313 78934

HYDERABAD
A V Gopalakrishna, Sr Engineer Sales-TMI
90082 96566

CHENNAI
Senthil Kumar, Manager-Sales
75500 76300

PUNE
Amol Kadu, Sales Manager-TMI
98450 44338

KOLKATA
Arun Roy, Manager-Sales
98305 78843

DELHI
Gaurav Rohilla, Sales Executive
72040 74949

VADODARA
Jaimin Shah, Application Engineer
73488 51143

Phone No.
080-67648888, 080-67648836

Sales

Email: sales@isc4esaindia.com


Support

Email: support@isc4esaindia.com

Email: service@isc4esaindia.com

JBC
DMSD Station 4-Tool Rework with DT530
Description

DMSD offers a solution for both SMDs and high-power applications. This station is perfect for desoldering jobs of through-hole components and removing excess solder after SMD rework.

It offers the highest soldering quality thanks to JBC Most Efficient Soldering System, with Intelligent Heat Management to extend tip life and reduce energy consumption.

Description

DMSD offers a solution for both SMDs and high-power applications. This station is perfect for desoldering jobs of through-hole components and removing excess solder after SMD rework.

It offers the highest soldering quality thanks to JBC Most Efficient Soldering System, with Intelligent Heat Management to extend tip life and reduce energy consumption.

Specifications
Specification
Peak power 150 W per tool
Selectable temperature 90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air) ±1.5ºC / ±3ºF Meets and exceed IPC J-STD-001F
Vacuum 85 % / 640 mmHg / 25.4 inHg
Flow rate 35 SLPM
Temperature accuracy ±3% using reference cartridge
Temp. adjustment ±50ºC / ±90ºF Through station settings menu
Tip-to-ground resistance <2 ohms
Tip-to-ground voltage <2 mV RMS
USB-A Firmware update
Graphics and profiles
Dino-Lite USB microscope connection
Compatible models: AM2011 and AM2111
USB-B PC communications
FAE Connector Remote control or FAE Fume Extractor connection
ESD safe Meet ANSI/ESD S20.20-2021
Weight and Dimensions
Control Unit 232 x 148 x 120 mm / 9.71 kg.
9.13 x 5.83 x 4.72 in / 21.41 lb.
Package 495 x 415 x 395 mm / 12.74 kg.
19.49 x 16.34 x 15.55 in / 28.09 lb.



Specifications
Specification
Peak power 150 W per tool
Selectable temperature 90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air) ±1.5ºC / ±3ºF Meets and exceed IPC J-STD-001F
Vacuum 85 % / 640 mmHg / 25.4 inHg
Flow rate 35 SLPM
Temperature accuracy ±3% using reference cartridge
Temp. adjustment ±50ºC / ±90ºF Through station settings menu
Tip-to-ground resistance <2 ohms
Tip-to-ground voltage <2 mV RMS
USB-A Firmware update
Graphics and profiles
Dino-Lite USB microscope connection
Compatible models: AM2011 and AM2111
USB-B PC communications
FAE Connector Remote control or FAE Fume Extractor connection
ESD safe Meet ANSI/ESD S20.20-2021
Weight and Dimensions
Control Unit 232 x 148 x 120 mm / 9.71 kg.
9.13 x 5.83 x 4.72 in / 21.41 lb.
Package 495 x 415 x 395 mm / 12.74 kg.
19.49 x 16.34 x 15.55 in / 28.09 lb.
Read More Sales Enquiry