QUICK ENQUIRY

Integrated Services and Consultancy

(An ESA Group Associate)
#37, Second Floor, “Embedded Home”,
36th Cross, II Block, Rajajinagar
Bengaluru-560010,
Karnataka,India

Pratibha Gopalam
Executive Director
98454 03264

BANGALORE
Santanu Chatterjee, DGM-Sales
9731378934

HYDERABAD
A V Gopalakrishna, Sr Engineer Sales-TMI
90082 96566

CHENNAI
Senthil Kumar, Manager-Sales
7550076300

PUNE
Amol Kadu, Sales Manager-TMI
9845044338

KOLKATA
Arun Roy, Manager-Sales
98305 78843

DELHI
Dharmaveer, Sales Manager
80531 7771

VADODARA
Jaimin Shah, Application Engineer
7348851143

Phone No.
080-67648888, 080-67648836

Sales

Email: sales@isc4esaindia.com


Support

Email: support@isc4esaindia.com

Email: service@isc4esaindia.com

Acute Technology Inc
eMMC 5.1
Features
  • Support eMMC 5.1 HS400 / HS200 / CMD Queue
  • LA04 (B)-tip: 4 Data Channel
  • eMMC-tip: 12 Data Channel + 2 Analog Channel​
  • Auto Data Phase Tuning
  • 3 Pin Mode: CMD, CLK, D0
  • Supports measurement of eMMC/MMC triggering, protocol, and decoding
  • 3-Pin Mode: If you only need to understand the waveform data of CMD and BUSY, a convenient 3-Pin Mode is provided, and there is no need to connect all the pin, you only need to connect CLK, CMD, and D0 Pin at the same time to measure CMD data
  • No Clk Mode: If you want to record only CMD waveform data for a long time, you can record the waveform of CMD pin through transition storage and decode the data. Test
Features
  • Support eMMC 5.1 HS400 / HS200 / CMD Queue
  • LA04 (B)-tip: 4 Data Channel
  • eMMC-tip: 12 Data Channel + 2 Analog Channel​
  • Auto Data Phase Tuning
  • 3 Pin Mode: CMD, CLK, D0
  • Supports measurement of eMMC/MMC triggering, protocol, and decoding
  • 3-Pin Mode: If you only need to understand the waveform data of CMD and BUSY, a convenient 3-Pin Mode is provided, and there is no need to connect all the pin, you only need to connect CLK, CMD, and D0 Pin at the same time to measure CMD data
  • No Clk Mode: If you want to record only CMD waveform data for a long time, you can record the waveform of CMD pin through transition storage and decode the data. Test
Scheme name eMMC 5.1
Tip name LA04 (B) / eMMC adapter board
Channel combination 4 (Data) / 12+2 (Data+Analog)
Trigger voltage (Data) range -0.5V ~ +4.8V / 0V ~ +3.3V
Trigger voltage (Data) resolution 21mV
Trigger voltage (Data) accuracy ±100mV + 5% *Vth
Input voltage (Data) Non-maximum destructive withstand voltage ±15V DC+AC peak / -0.5V ~ +5V DC+AC peak
Input voltage (Data) working range -1V ~ 8V / 0V ~ 3.3V
Input voltage (Data) Sensitivity ~300mV / ~150mV
Input impedance(Data) 1MΩ || 5pF / 500kΩ || 2pF
Input voltage (Analog) non-maximum destructive withstand voltage - / -0.5V ~ +8V DC+AC peak
Input voltage (Analog) working range - / 0V ~ 4V
Input voltage (Analog) resolution - / ~1mV
Input voltage (Analog) Sampling rate -/1M
Input impedance(Analog) - / 1MΩ || 100pF
Read More Sales Enquiry