Description
Function/signal generators generally provide
signals with a small amplitude into 50-Ohm systems.
Signal conditioning and amplification are therefore required in many
technical areas.
The TOE 7608 broadband amplifier is suitable as a non-inverting
power output stage for the amplification of such signal sources.
Each generator with an output voltage of 20 Vpp is able to cover the
full operating range of the TOE 7608 amplifier; the power is 63 W
into 8 Ohm at a max. output amplitude of 45 Vpp. The bandwidth is DC
to 500 kHz.
Overcurrent protection at the output, protection against feedback
voltages, and overtemperature protection provide the amplifier with
a high degree of operational safety.
Special Features
- Frequency range DC to 500 kHz
- Short-circuit and no-load proof
- Feedback voltage protection up to 120 V
Description
Function/signal generators generally provide
signals with a small amplitude into 50-Ohm systems.
Signal conditioning and amplification are therefore required in many
technical areas.
The TOE 7608 broadband amplifier is suitable as a non-inverting
power output stage for the amplification of such signal sources.
Each generator with an output voltage of 20 Vpp is able to cover the
full operating range of the TOE 7608 amplifier; the power is 63 W
into 8 Ohm at a max. output amplitude of 45 Vpp. The bandwidth is DC
to 500 kHz.
Overcurrent protection at the output, protection against feedback
voltages, and overtemperature protection provide the amplifier with
a high degree of operational safety.
Special Features
- Frequency range DC to 500 kHz
- Short-circuit and no-load proof
- Feedback voltage protection up to 120 V
