Acute Technology Inc.

About Acute Technology

Acute Technology Inc. was established in 1996 and is headquartered in Taiwan. It focuses on the development of PC-Based measuring instruments.

Including TravelScope digital storage oscilloscope, TravelLogic logic analyzer, BusFinder eMMC, SD, MIPI D-PHY protocol analyzer, LA3000+ logic analyzer, DG3000/TraveData data generator, ADP series differential probe, TravelBus two-in-one analyzer, As well as MSO2000/3000 mixed signal analyzers, these analytical instruments provide various communication interface protocols and logic analysis. At the same time, it is light, thin, short and very easy to carry. We hope to provide customers with convenient and efficient solutions.

Huangjing Technology is committed to providing high-quality measuring instruments and constantly innovating to meet the needs of different application fields. Our products are widely used in the electronics industry, communication technology, and other fields that require precise measurement and analysis.


Featured Products
Products
Digital Storage Oscilloscopes

TS3124V oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Sampling rate: 1 GS/s
  • Vertical resolution: 16 bits

TS3124H oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Sample rate: 1 GS/s
  • Vertical resolution: 16 bits

TS3124B oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Sampling rate: 1 GS/s
  • Vertical resolution: 8 bits

TS3124E oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Sampling rate: 1 GS/s
  • Vertical resolution: 8 bits
Mixed Signal Oscilloscope

MSO3124E mixed signal oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Digital channels: 16
  • Sampling rate: 1 GS/s


MSO3124V mixed signal oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Digital channels: 16
  • Electrical characteristics verification: I2C, I3C, SPI, UART, ...

MSO3124H mixed signal oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Digital channels: 16
  • Oscilloscope stacking


MSO3124B Mixed Signal Oscilloscope

  • Bandwidth: 200 MHz
  • Analog channels: 4
  • Digital channels: 16
  • Vertical resolution: 8 bits


Protocol Analyzer

BF7264B+ Protocol Analyzer

  • Channels: 64
  • Total Memory: 32Gb
  • Timing Analysis: 2.4 GHz
  • Supported Solutions: UFS2.1,

BF7264B Protocol Analyzer

  • Channels: 64
  • Total Memory: 32Gb
  • Timing Analysis: 2.4 GHz
  • Supported Solutions: MIPI D-PHY 1.2, ...

UFS2.1

Support UFS 2.1 Gen 3, Rate A/B, up to 5.8Gbps per lane, 2 Lanes

SGMII

Support SGMII 1Gbps, 100Mbps, 10Mbps, Ports: TXp, TXn, RXp, RXn, Ref.Clk

NAND Flash

Support Data(I/O) pin: x8, x16 Support ONFI 4.1(NV-DDR3), Mode 8 / Toggle DDR 2.0 ~267MHz

eMMC 5.1

Support eMMC 5.1 HS400 / HS200 / CMD Queue

SD3.0/SDIO3.0

Support SD 3.0 SDR104 / SD6.0 Legacy mode SDR104, DDR200, Command Queue/ SDIO 3.0

SD4.1

Support UHS-II, SD 3.0, SD 6.1 Legacy mode

MIPI D-PHY

Supports D-PHY V1.2 to display DSI and CSI image data

eDP1.4a

Support eDP 1.4a, up to 5.4Gbps, 4 Lanes

LA Probe

Provides eMMC 5.1, NAND Flash, SD 3.0 (SDIO 3.0), Serial Flash (SPI NAND), SPI bus triggering and more than 100 bus decodes

LVDS Probe

Can be applied to logic signal and low voltage differential signal measurement.

Logic Analyzer

TB3016B logic analyzer

  • Channels: 25
  • Differential signal triggering/protocol/decoding: DP_Aux, CAN2.0/CAN-FD, RS485
  • Timing analysis: 800MHz
  • Status analysis: 200MHz

TB3016E logic analyzer

  • Channels: 19
  • Differential signal decoding: DP_Aux
  • Timing analysis: 800MHz
  • Status analysis: 200MHz


TB3016F logic analyzer

  • Channels: 19
  • Differential signal decoding: DP_Aux
  • Timing analysis: 800MHz
  • Status analysis: 200MHz


TL4234B logic analyzer

  • Channels: 34
  • Total Memory: 8Gb
  • Timing Analysis: 2GHz
  • Record Depth: 1Gb



TL4134B logic analyzer

  • Channels: 34
  • Total Memory: 4Gb
  • Timing Analysis: 2GHz
  • Record Depth: 512Mb

TL4134E logic analyzer

  • Channels: 34
  • Total Memory: 4Gb
  • Timing Analysis: 2GHz
  • Record Depth: 512Mb

LA3136B+ logic analyzer

  • Channels: 136
  • Total memory: 32 Gb
  • Timing analysis: 2.4 GHz
  • State analysis: 300 MHz

LA3068B+ logic analyzer

  • Channels: 68
  • Total memory: 32 Gb
  • Timing analysis: 2.4 GHz
  • State analysis: 300 MHz

LA3136E+ logic analyzer

  • Channels: 136
  • Total memory: 32 Gb
  • Timing analysis: 2.4 GHz
  • State analysis: 300 MHz

LA3068E+ logic analyzer

  • Channels: 68
  • Total memory: 32 Gb
  • Timing analysis: 2.4 GHz
  • State analysis: 300 MHz
Digital Waveform Generator

TD3216B digital waveform generator

  • Number of channels: 16
  • Output speed: up to 200Mbps @Ch
  • Memory depth: 1Mb per channel
  • Resolution: 0.1V

TD3116B digital waveform generator

  • Number of channels: 16
  • Output speed: up to 200Mbps @Ch
  • Memory depth: 1Mb per channel
  • Resolution: 0.1V

TD3008E digital waveform generator

  • Number of channels: 8
  • Output speed: up to 100Mbps @Ch
  • Memory depth: 512Kb per channel
  • Resolution: 0.1V

DG3128B digital waveform generator

  • Number of channels: 112
  • Output speed: up to 400Mbps @Ch
  • Memory depth: 256Mb per channel
  • Resolution: 0.1V

DG3096B digital waveform generator

  • Number of channels: 80
  • Output speed: up to 400Mbps @Ch
  • Memory depth: 256Mb per channel
  • Resolution: 0.1V

DG3064B digital waveform generator

  • Number of channels: 48
  • Output speed: up to 400Mbps @Ch
  • Memory depth: 256Mb per channel
  • Resolution: 0.1V
Mixed Signal Logic Analyzer

MSO1116E Mixed Signal Logic Analyzer

  • Analog/digital channels: 16 [shared channels]
  • Bandwidth: 40 MHz
  • Sample rate: 200 MS/s
  • Total memory: 4 Gb

MSO1008E Mixed Signal Logic Analyzer

  • Analog/digital channels: 8 [shared channels]
  • Bandwidth: 40 MHz
  • Sample rate: 200 MS/s
  • Total memory: 2 Gb

MSO2216B Mixed Signal Logic Analyzer

  • Analog/digital channels: 16 [shared channels]
  • Bandwidth: 40 MHz
  • Sample rate: 200 MS/s
  • Total memory: 8 Gb

MSO2116B Mixed Signal Logic Analyzer

  • Analog/digital channels: 16 [shared channels]
  • Bandwidth: 40 MHz
  • Sample rate: 200 MS/s
  • Total memory: 4 Gb
High Voltage Differential Probe

ADP1100-B High Voltage Differential Probe

  • Battery powered
  • Bandwidth: 100MHz
  • Attenuation ratio: 10X / 100X
  • Maximum differential voltage range: 700V

ADP1025-B High Voltage Differential Probe

  • Battery powered
  • Bandwidth: 25MHz
  • Attenuation ratio: 10X / 100X
  • Maximum differential voltage range: 700V

ADP1100-U High Voltage Differential Probe

  • USB powered
  • Bandwidth: 100MHz
  • Attenuation ratio: 10X / 100X
  • Maximum differential voltage range: 700V

ADP1025-U High Voltage Differential Probe

  • USB powered
  • Bandwidth: 25MHz
  • Attenuation ratio: 10X / 100X
  • Maximum differential voltage range: 700V

ADP2100-B High Voltage Differential Probe

  • Battery powered
  • Bandwidth: 100MHz
  • Attenuation ratio: 20X / 200X
  • Maximum differential voltage range: 1400V

ADP2025-B High Voltage Differential Probe

  • Battery powered
  • Bandwidth: 25MHz
  • Attenuation ratio: 20X / 200X
  • Maximum differential voltage range: 1400V

ADP2100-U High Voltage Differential Probe

  • USB powered
  • Bandwidth: 100MHz
  • Attenuation ratio: 20X / 200X
  • Maximum differential voltage range: 1400V

ADP2025-U High Voltage Differential Probe

  • USB powered
  • Bandwidth: 25MHz
  • Attenuation ratio: 20X / 200X
  • Maximum differential voltage range: 1400V

ADP5100-B High Voltage Differential Probe

  • Battery powered
  • Bandwidth: 100MHz
  • Attenuation ratio: 50X / 500X
  • Maximum differential voltage range: 3500V

ADP5025-B High Voltage Differential Probe

  • Battery powered
  • Bandwidth: 25MHz
  • Attenuation ratio: 50X / 500X
  • Maximum differential voltage range: 3500V

ADP5100-U High Voltage Differential Probe

  • USB powered
  • Bandwidth: 100MHz
  • Attenuation ratio: 50X / 500X
  • Maximum differential voltage range: 3500V

ADP5025-U High Voltage Differential Probe

  • USB powered
  • Bandwidth: 25MHz
  • Attenuation ratio: 50X / 500X
  • Maximum differential voltage range: 3500V
Spare Parts

SD3.0 extension board

Exclusively for BusFinder; SD3.0 extension board


uSD4.0 extension board

Special for BusFinder; uSD4.0 extension board


SD4.0 extension board

Special for BusFinder; SD4.0 extension board (compatible with SD 3.0)


eMMC connector

Exclusively for BusFinder; eMMC probe tip (with connector)


eMMC Jumper Connector

Special for BusFinder; eMMC probe Tip (jumper connector)



MIPI60 adapter board

MIPI 60 connector, with 2.54mm pin header test points



USB Type C adapter

Provides measurement of USB3.0 Type-C CC1/CC2, SBU1/SBU2 lines



DP_Aux differential signal adapter board

Process the DP_Aux signal into a single-ended signal for measurement


MSO1000/2000 series cable arrangement

  • 40 insulated cables
  • Length: 18.5cm/8cm
  • Only applicable to MSO1000/2000 series models

TL3000/TL4000 series cable

  • 40 insulated flat cables
  • Length: 18.5 cm / 8 cm
  • Only applicable to TL3000 / TL4000 series models


USB3.0 Cable

  • Plug and play
  • Can block unnecessary noise at the same time
  • Multiple isolation coatings, stable signal

Probe Clip/Test Clip

Spring-loaded probe holder with mini clip






High voltage differential probe test hook

  • Rated voltage/current: 1000 Volts, CAT III/3A

MCX to BNC Cable trigger line

  • Stacking external oscilloscopes for use